How to Use DriveView 9 for Parameterization, Testing, and Monitoring of LS Drives
DriveView 9: A Powerful Software Tool for LS ELECTRIC Inverters
If you are looking for a software tool that can help you with engineering, monitoring, and maintaining LS ELECTRIC inverters, you should check out DriveView 9. DriveView 9 is a user-friendly and versatile software that allows you to remotely access, control, and optimize your drives from your PC. In this article, we will introduce DriveView 9 and its features, show you how to install and connect it to your drives, and guide you through some common tasks that you can perform with it.
driveview 9 download
What is DriveView 9 and what can it do?
DriveView 9 is a software tool for engineering the LS ELECTRIC inverter, referred to as drives. The tool holds the features for remote monitoring the drives connected to DriveView 9 and supports the necessary tasks needed for start-up and maintenance. DriveView 9 has the following main functions:
Remote monitoring and control of drives
With DriveView 9, you can monitor the status and parameters of your drives in real time, such as speed, torque, current, voltage, frequency, power, etc. You can also control the operation of your drives, such as start, stop, jog, direction, speed reference, etc. You can also set up alarms and notifications for any abnormal conditions or events that occur in your drives.
Parameter editing and backup
With DriveView 9, you can edit the parameters of your drives according to your application needs. You can change the values of individual parameters or use predefined parameter sets for different modes or functions. You can also save the parameters of your drives to your PC or load them from your PC. This way, you can easily backup or restore your drive settings.
driveview 9 software installation guide
driveview 9 parameterization of ls drives
driveview 9 oscilloscope function
driveview 9 drive testing
driveview 9 parameter backups
driveview 9 rs-485 connection
driveview 9 modbus rtu protocol
driveview 9 manual pdf
driveview 9 release note
driveview 9 youtube tutorial
driveview 9 compatible drives
driveview 9 troubleshooting
driveview 9 update version
driveview 9 license key
driveview 9 free download
driveview 9 vs drive view 5
driveview 9 for windows 10
driveview 9 for mac
driveview 9 online support
driveview 9 user reviews
driveview 9 features and benefits
driveview 9 system requirements
driveview 9 alternatives and competitors
driveview 9 pricing and plans
driveview 9 demo and trial
driveview 9 customer service and contact
driveview 9 faq and help center
driveview 9 how to use and tips
driveview 9 best practices and examples
driveview 9 case studies and testimonials
driveview 9 advantages and disadvantages
driveview 9 comparison and review
driveview 9 coupon code and discount
driveview 9 affiliate program and commission
driveview 9 warranty and guarantee
driveview 9 refund policy and terms of service
driveview 9 feedback and suggestions
driveview 9 error codes and solutions
driveview 9 forum and community
driveview 9 blog and news
Trip history and event log
With DriveView 9, you can view the trip history and event log of your drives. The trip history shows the details of the last 10 trips that occurred in your drives, such as trip code, time, date, parameter values, etc. The event log shows the records of the events that occurred in your drives, such as power on/off, parameter change, alarm, etc. You can also clear the trip history and event log if needed.
Graphical display and trend analysis
With DriveView 9, you can display the data of your drives in graphical forms, such as bar graphs, line graphs, pie charts, etc. You can select up to four parameters to display at the same time and customize the appearance of the graphs. You can also analyze the trends of the data over time and export the graphs to image files or Excel files.
Firmware update and drive diagnosis
With DriveView 9, you can update the firmware of your drives to the latest version. You can download the firmware files from the LS ELECTRIC website or use the ones provided by LS ELECTRIC. You can also diagnose any errors or faults that occur in your drives using DriveView 9. You can check the error codes, descriptions, causes, and solutions for each error or fault.
How to install DriveView 9 on your PC
To use To use DriveView 9, you need to install it on your PC first. Here are the steps to install DriveView 9 on your PC: System requirements and compatibility
Before installing DriveView 9, make sure that your PC meets the following system requirements:
Operating system: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10 (32-bit or 64-bit)
CPU: Pentium IV 1.6 GHz or higher
RAM: 512 MB or higher
HDD: 100 MB or higher
Display: 1024 x 768 pixels or higher
USB port: USB 2.0 or higher
Also, make sure that your drives are compatible with DriveView 9. DriveView 9 supports the following LS ELECTRIC drive products:
MV1000/2000/3000/4000/5000/6000/7000/8000/9000/10000/11000/12000/13000/14000/15000/16000/17000/18000/19000/20000/21000/22000/23000/24000/25000/26000/27000/28000/29000/30000 (MV Drive)
Installation steps and options
To install DriveView 9, follow these steps:
Download the DriveView 9 installation file from the LS ELECTRIC website or use the CD-ROM provided by LS ELECTRIC.
Run the installation file and follow the instructions on the screen.
Select the language and the destination folder for DriveView 9.
Select the components to install. You can choose to install DriveView 9, USB driver, and user manual.
Click Install and wait for the installation to complete.
Click Finish and restart your PC if prompted.
You can also customize some options for DriveView 9 during or after the installation, such as:
Shortcut creation: You can choose to create shortcuts for DriveView 9 on your desktop, start menu, or quick launch bar.
Auto run: You can choose to run DriveView 9 automatically when you connect a drive to your PC via USB.
Auto update: You can choose to check for updates for DriveView 9 automatically or manually.
Language: You can choose the language for DriveView 9 from English, Korean, Chinese, Japanese, Spanish, French, German, Italian, Russian, Turkish, or Portuguese.
USB driver installation for H100 product
If you are using the H100 product, you need to install the USB driver separately after installing DriveView 9. The USB driver is required for communicating with the H100 product via USB. To install the USB driver, follow these steps:
Connect the H100 product to your PC via USB cable.
Open the Device Manager on your PC and find the H100 product under Other devices.
Right-click on the H100 product and select Update Driver Software.
Select Browse my computer for driver software and locate the USB driver folder in the DriveView 9 installation folder.
Click Next and wait for the driver installation to complete.
Click Close and check that the H100 product is recognized as a COM port under Ports (COM & LPT).
How to connect DriveView 9 to your drives
To use DriveView 9, you need to connect it to your drives via a communication method and protocol. Here are the steps to connect DriveView 9 to your drives:
Supported communication methods and protocols
DriveView 9 supports the following communication methods and protocols:
RS-232C/RS-485Modbus RTUA serial communication protocol that uses binary data transmission. It requires a RS-232C/RS-485 converter and a cable to connect to your drives.
EthernetModbus TCP/IPA network communication protocol that uses TCP/IP data transmission. It requires a Ethernet cable or a wireless router to connect to your drives.
USBHID (Human Interface Device)A plug-and-play communication protocol that uses USB data transmission. It requires a USB cable to connect to your drives. It is only available for H100 product.
BACnet MS/TPBACnet MS/TPA serial communication protocol that uses RS-485 data transmission. It is designed for building automation and control systems. It requires a BACnet MS/TP converter and a cable to connect to your drives.
BACnet IPBACnet IPA network communication protocol that uses UDP/IP data transmission. It is designed for building automation and control systems. It requires a BACnet IP converter and a cable or a wireless router to connect to your drives.
LONWORKSLONWORKSA network communication protocol that uses twisted pair data transmission. It is designed for building automation and control systems. It requires a LONWORKS converter and a cable to connect to your drives.
METASYS N2METASYS N2A serial communication protocol that uses RS-485 data transmission. It is desig